Merge pull request #94 from Project-Babble/main

Update main to deployment

Author: SummerSigh

docs/babbleofficaltracker/babbleofficaltracker.mdx

@@ -17,7 +17,7 @@ If you'd like to use your tracker in *Wireless* mode, follow this [guide.](docs/
 **Plug your tracker into your PC**
 1) Connect using the USB port on your tracker
 1) Make sure the switch is in the "ON" position, as seen below
-1) A bright green lights should appear on the back of the tracker
+1) A bright green light should appear on the back of the tracker
 1) You should hear a connection sound when properly connected
 1) The tracker will take about 20 seconds to boot upon receiving power
 
@@ -29,7 +29,7 @@ If you'd like to use your tracker in *Wireless* mode, follow this [guide.](docs/
 #### macOS/Linux
     - Currently, we do not offer installers for these platforms. You will need to build these from source.
     - For assistance building Babble Avalonia on these platforms, please contact us in our discord server.
-    - Our [Legacy App](docs\software\babbleApps\babble-app.mdx) can be run from our [installer scripts](https://github.com/project-Babble/projectBabble/?tab=readme-ov-file#macos-and-linux) on the Github
+    - Our [Legacy App](docs\babbleofficaltracker\legacySetup.mdx) can be run from our [installer scripts](https://github.com/project-Babble/projectBabble/?tab=readme-ov-file#macos-and-linux) on the Github
 
 
 ### Mode Selection
@@ -61,8 +61,9 @@ Upon connecting the tracker, you will have a 20 second window to press ‘Refres
 
 ![mode](@site\static\img\avalonia\firmware\new\mode.png)
 
-
-![wifi](@site\static\img\avalonia\firmware\new\wifi.png)
+:::info
+You do not need to utilize the firmware flashing feature after changing mode
+:::
 
 #### Step 4 Unplug and replug your tracker. 20 seconds after being powered on, it will start!
 

docs/babbleofficaltracker/babbleofficaltrackerwireless.mdx

@@ -15,7 +15,7 @@ title: Wireless Setup
 **Plug your tracker into your PC**
 1) Connect using the USB port on your tracker
 1) Make sure the switch is in the "ON" position, as seen below
-1) A bright green lights should appear on the back of the tracker
+1) A bright green light should appear on the back of the tracker
 1) You should hear a connection sound when properly connected
 1) The tracker will take about 20 seconds to boot upon receiving power
 
@@ -64,6 +64,10 @@ Upon connecting the tracker, you will have a 20 second window to press ‘Refres
 
 ![mode](@site\static\img\avalonia\firmware\new\mode.png)
 
+:::info
+You do not need to utilize the firmware flashing feature after changing mode
+:::
+
 #### Step 3.1 - Set your Wifi credentials:
 
 :::warning

docs/intro/intro.mdx

@@ -8,7 +8,7 @@ sidebar_position: 1
 Welcome to the official Project Babble repository! This site is your go-to resource for all things related to our innovative system, including hardware, software, and troubleshooting tips.
 
 ## If you have purchased a Offical Project Babble Kit, you are in the right place!
-- Start Here: [Getting Started](docs\babbleofficaltracker\babbleofficaltracker.mdx)
+### Start Here: [Getting Started](docs\babbleofficaltracker\babbleofficaltracker.mdx)
 
 ## What is Project Babble?
 

docs/software/baballonia.mdx

@@ -17,13 +17,13 @@ This is the main tab of Babballonia, you will use this page to select, modify, a
 
 In the top right is the Eye Calibration button. You will need to perform an eye calibration as a part the eye tracking first time setup.
 
-Currently, there is only Eye Calibration option available.
+Currently, there is only an Eye Calibration option available.
 
 ## Calibration
 
 ![Calibration](@site\static\img\avalonia\Calibration.png)
 
-The calibraiton page is used to calibrate the sensitivity of your face expressions.
+The calibration page is used to calibrate the sensitivity of your face expressions.
 - Raising the Minimum value requires a stronger expression before it starts to show.
 - Lowering the Maximum value means a smaller expression will reach 100% faster.