Add overlay definitions

facchinm · facchinm · commit 8972e383ea1b · 2025-09-17T11:57:11.000+02:00
diff --git a/variants/arduino_portenta_c33_r7fa6m5bh3cfc/arduino_portenta_c33_r7fa6m5bh3cfc.conf b/variants/arduino_portenta_c33_r7fa6m5bh3cfc/arduino_portenta_c33_r7fa6m5bh3cfc.conf
@@ -100,4 +100,6 @@ CONFIG_BT_BUF_CMD_TX_SIZE=255
 CONFIG_BT_BUF_EVT_DISCARDABLE_SIZE=255
 CONFIG_BT_MAX_CONN=4
 CONFIG_BT_CTLR_ADV_EXT=y
-CONFIG_BT_CTLR_ADV_PERIODIC=y
+CONFIG_BT_CTLR_ADV_PERIODIC=y
+
+CONFIG_POSIX_DEVICE_IO=y
diff --git a/variants/arduino_portenta_c33_r7fa6m5bh3cfc/arduino_portenta_c33_r7fa6m5bh3cfc.overlay b/variants/arduino_portenta_c33_r7fa6m5bh3cfc/arduino_portenta_c33_r7fa6m5bh3cfc.overlay
@@ -275,6 +275,12 @@
 		spis = <&spi1>;
 		pwms = <&pwm6 1 PWM_HZ(25000000) PWM_POLARITY_NORMAL>;
 
+		/* UWB specific */
+		cs-gpios = <&ioport1 3 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&ioport7 6 GPIO_ACTIVE_HIGH>;
+		irq-gpios = <&ioport4 9 GPIO_ACTIVE_HIGH>;
+		rdy-gpios = <&ioport0 9 GPIO_ACTIVE_HIGH>;
+
 		io-channels =	<&adc0 6>,
 				<&adc0 5>,
 				<&adc0 4>,
