Add enumerations and allocator for isochronous endpoints

Author: ianrrees

src/bus.rs

@@ -1,4 +1,7 @@
-use crate::endpoint::{Endpoint, EndpointAddress, EndpointDirection, EndpointType};
+use crate::endpoint::{
+    Endpoint, EndpointAddress, EndpointDirection, EndpointType, IsochronousSynchronizationType,
+    IsochronousUsageType,
+};
 use crate::{Result, UsbDirection, UsbError};
 use core::cell::RefCell;
 use core::mem;
@@ -244,6 +247,37 @@ impl<B: UsbBus> UsbBusAllocator<B> {
             .expect("alloc_ep failed")
     }
 
+    /// Allocates an isochronous endpoint.
+    ///
+    /// # Arguments
+    ///
+    /// * `synchronization` - Type of synchronization used by the endpoint
+    /// * `usage` - Whether the endpoint is data, explicit feedback, or data+implicit feedback
+    /// * `payload_size` - Payload size in bytes.
+    /// * `interval` - Interval for polling, expressed in frames/microframes.  Must be 1 to 16,
+    ///    calculated as 2^(interval-1), see USB 2.0 section 9.6.6.
+    ///
+    /// # Panics
+    ///
+    /// Panics if endpoint allocation fails, because running out of endpoints or memory is not
+    /// feasibly recoverable.
+    #[inline]
+    pub fn isochronous<D: EndpointDirection>(
+        &self,
+        synchronization: IsochronousSynchronizationType,
+        usage: IsochronousUsageType,
+        payload_size: u16,
+        interval: u8,
+    ) -> Endpoint<'_, B, D> {
+        self.alloc(
+            None,
+            EndpointType::Isochronous((synchronization, usage)),
+            payload_size,
+            interval,
+        )
+        .expect("alloc_ep failed")
+    }
+
     /// Allocates a bulk endpoint.
     ///
     /// # Arguments
@@ -263,6 +297,7 @@ impl<B: UsbBus> UsbBusAllocator<B> {
     /// Allocates an interrupt endpoint.
     ///
     /// * `max_packet_size` - Maximum packet size in bytes. Cannot exceed 64 bytes.
+    /// * `interval` - Polling interval.
     ///
     /// # Panics
     ///

src/descriptor.rs

@@ -324,7 +324,7 @@ impl DescriptorWriter<'_> {
             let mps = endpoint.max_packet_size();
 
             buf[0] = endpoint.address().into();
-            buf[1] = endpoint.ep_type() as u8;
+            buf[1] = endpoint.ep_type().to_bm_attributes();
             buf[2] = mps as u8;
             buf[3] = (mps >> 8) as u8;
             buf[4] = endpoint.interval();

src/endpoint.rs

@@ -29,21 +29,69 @@ pub type EndpointOut<'a, B> = Endpoint<'a, B, Out>;
 /// A device-to-host (IN) endpoint.
 pub type EndpointIn<'a, B> = Endpoint<'a, B, In>;
 
-/// USB endpoint transfer type. The values of this enum can be directly cast into `u8` to get the
-/// transfer bmAttributes transfer type bits.
-#[repr(u8)]
+/// Isochronous transfers employ one of three synchronization schemes. See USB 2.0 spec 5.12.4.1.
+#[derive(Copy, Clone, Eq, PartialEq, Debug)]
+pub enum IsochronousSynchronizationType {
+    /// Synchronization is not implemented for this endpoint.
+    NoSynchronization,
+    /// Source and Sink sample clocks are free running.
+    Asynchronous,
+    /// Source sample clock is locked to Sink, Sink sample clock is locked to data flow.
+    Adaptive,
+    /// Source and Sink sample clocks are locked to USB SOF.
+    Synchronous,
+}
+
+/// Intended use of an isochronous endpoint, see USB 2.0 spec sections 5.12 and 9.6.6.
+/// Associations between data and feedback endpoints are described in section 9.6.6.
+#[derive(Copy, Clone, Eq, PartialEq, Debug)]
+pub enum IsochronousUsageType {
+    /// Endpoint is used for isochronous data.
+    Data,
+    /// Feedback for synchronization.
+    Feedback,
+    /// Endpoint is data and provides implicit feedback for synchronization.
+    ImplicitFeedbackData,
+}
+
+/// USB endpoint transfer type.
 #[derive(Copy, Clone, Eq, PartialEq, Debug)]
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub enum EndpointType {
     /// Control endpoint. Used for device management. Only the host can initiate requests. Usually
     /// used only endpoint 0.
-    Control = 0b00,
-    /// Isochronous endpoint. Used for time-critical unreliable data. Not implemented yet.
-    Isochronous = 0b01,
+    Control,
+    /// Isochronous endpoint. Used for time-critical unreliable data.
+    Isochronous((IsochronousSynchronizationType, IsochronousUsageType)),
     /// Bulk endpoint. Used for large amounts of best-effort reliable data.
-    Bulk = 0b10,
+    Bulk,
     /// Interrupt endpoint. Used for small amounts of time-critical reliable data.
-    Interrupt = 0b11,
+    Interrupt,
+}
+
+impl EndpointType {
+    /// Format EndpointType for use in bmAttributes transfer type field USB 2.0 spec section 9.6.6
+    pub fn to_bm_attributes(&self) -> u8 {
+        match self {
+            EndpointType::Control => 0b00,
+            EndpointType::Isochronous((sync_type, usage_type)) => {
+                let sync_bits = match sync_type {
+                    IsochronousSynchronizationType::NoSynchronization => 0b00,
+                    IsochronousSynchronizationType::Asynchronous => 0b01,
+                    IsochronousSynchronizationType::Adaptive => 0b10,
+                    IsochronousSynchronizationType::Synchronous => 0b11,
+                };
+                let usage_bits = match usage_type {
+                    IsochronousUsageType::Data => 0b00,
+                    IsochronousUsageType::Feedback => 0b01,
+                    IsochronousUsageType::ImplicitFeedbackData => 0b10,
+                };
+                (usage_bits << 4) | (sync_bits << 2) | 0b01
+            }
+            EndpointType::Bulk => 0b10,
+            EndpointType::Interrupt => 0b11,
+        }
+    }
 }
 
 /// Handle for a USB endpoint. The endpoint direction is constrained by the `D` type argument, which