Update GSM_Coordinates.ino

Author: vittorioexp

examples/GSM_Coordinates/GSM_Coordinates.ino

@@ -1,108 +1,108 @@
-/*
-    This library was written by Vittorio Esposito
-      https://github.com/VittorioEsposito
-
-    Designed to work with the GSM Sim800L.
-
-    ENG
-      This library uses SoftwareSerial, you can define RX and TX pins
-      in the header "Sim800L.h", by default pins are RX=10 and TX=11.
-      Be sure that GND is connected to arduino too.
-      You can also change the RESET_PIN as you prefer.
-
-    ESP
-      Esta libreria usa SoftwareSerial, se pueden cambiar los pines de RX y TX
-      en el archivo header, "Sim800L.h", por defecto los pines vienen configurado en
-      RX=10 TX=11.
-      Tambien se puede cambiar el RESET_PIN por otro que prefiera
-
-    ITA
-      Questa libreria utilizza la SoftwareSerial, si possono cambiare i pin di RX e TX
-      dall' intestazione "Sim800L.h", di default essi sono impostati come RX=10 RX=11
-      Assicurarsi di aver collegato il dispositivo al pin GND di Arduino.
-      E' anche possibile cambiare il RESET_PIN.
-
-
-     DEFAULT PINOUT:
-          _____________________________
-         |  ARDUINO UNO >>>   Sim800L  |
-          -----------------------------
-              GND      >>>   GND
-          RX  10       >>>   TX
-          TX  11       >>>   RX
-         RESET 2       >>>   RST
-
-     POWER SOURCE 4.2V >>> VCC
-
-
-    SOFTWARE SERIAL NOTES:
-
-      PINOUT
-      The library has the following known limitations:
-      1. If using multiple software serial ports, only one can receive data at a time.
-      2. Not all pins on the Mega and Mega 2560 support change interrupts, so only the following can be used for RX: 10, 11, 12, 13, 14, 15, 50, 51, 52, 53, A8 (62), A9 (63), A10 (64), A11 (65), A12 (66), A13 (67), A14 (68), A15 (69).
-      3. Not all pins on the Leonardo and Micro support change interrupts, so only the following can be used for RX: 8, 9, 10, 11, 14 (MISO), 15 (SCK), 16 (MOSI).
-      4. On Arduino or Genuino 101 the current maximum RX speed is 57600bps
-      5. On Arduino or Genuino 101 RX doesn't work on Pin 13
-
-      BAUD RATE
-      Supported baud rates are 300, 600, 1200, 2400, 4800, 9600, 14400, 19200, 28800, 31250, 38400, 57600, and 115200.
-
-
-    Edited on:  December 24, 2016
-      Editor:   Vittorio Esposito
-
-    Original version by:   Cristian Steib
-
-
-*/
-
-#include <Sim800L.h>
-#include <SoftwareSerial.h>
-
-#define RX  10
-#define TX  11
-
-Sim800L GSM(RX, TX);
-
-/*
-   In alternative:
-   Sim800L GSM;                       // Use default pinout
-   Sim800L GSM(RX, TX, RESET);
-   Sim800L GSM(RX, TX, RESET, LED);
-*/
-
-void setup() {
-  Serial.begin(9600);
-  GSM.begin(4800);
-
-  if (GSM.calculateLocation()) Serial.println("Location Calculated");
-  else Serial.println("Error in calculating location");
-
-  Serial.print("Location Code: ");
-  Serial.println(GSM.getLocationCode());
-
-  Serial.print("Longitude: ");
-  Serial.println(GSM.getLongitude());
-
-  Serial.print("Longitude: ");
-  Serial.println(GSM.getLatitude());
-
-  /*
-     Location Code:
-     0      Success
-     404    Not Found
-     408    Request Time-out
-     601    Network Error
-     602    No Memory
-     603    DNS Error
-     604    Stack Busy
-     65535  Other Error
-  */
-
-}
-
-void loop() {
-
-}
+/*
+    This library was written by Vittorio Esposito
+      https://github.com/VittorioEsposito
+
+    Designed to work with the GSM Sim800L.
+
+    ENG
+      This library uses SoftwareSerial, you can define RX and TX pins
+      in the header "Sim800L.h", by default pins are RX=10 and TX=11.
+      Be sure that GND is connected to arduino too.
+      You can also change the RESET_PIN as you prefer.
+
+    ESP
+      Esta libreria usa SoftwareSerial, se pueden cambiar los pines de RX y TX
+      en el archivo header, "Sim800L.h", por defecto los pines vienen configurado en
+      RX=10 TX=11.
+      Tambien se puede cambiar el RESET_PIN por otro que prefiera
+
+    ITA
+      Questa libreria utilizza la SoftwareSerial, si possono cambiare i pin di RX e TX
+      dall' intestazione "Sim800L.h", di default essi sono impostati come RX=10 RX=11
+      Assicurarsi di aver collegato il dispositivo al pin GND di Arduino.
+      E' anche possibile cambiare il RESET_PIN.
+
+
+     DEFAULT PINOUT:
+          _____________________________
+         |  ARDUINO UNO >>>   Sim800L  |
+          -----------------------------
+              GND      >>>   GND
+          RX  10       >>>   TX
+          TX  11       >>>   RX
+         RESET 2       >>>   RST
+
+     POWER SOURCE 4.2V >>> VCC
+
+
+    SOFTWARE SERIAL NOTES:
+
+      PINOUT
+      The library has the following known limitations:
+      1. If using multiple software serial ports, only one can receive data at a time.
+      2. Not all pins on the Mega and Mega 2560 support change interrupts, so only the following can be used for RX: 10, 11, 12, 13, 14, 15, 50, 51, 52, 53, A8 (62), A9 (63), A10 (64), A11 (65), A12 (66), A13 (67), A14 (68), A15 (69).
+      3. Not all pins on the Leonardo and Micro support change interrupts, so only the following can be used for RX: 8, 9, 10, 11, 14 (MISO), 15 (SCK), 16 (MOSI).
+      4. On Arduino or Genuino 101 the current maximum RX speed is 57600bps
+      5. On Arduino or Genuino 101 RX doesn't work on Pin 13
+
+      BAUD RATE
+      Supported baud rates are 300, 600, 1200, 2400, 4800, 9600, 14400, 19200, 28800, 31250, 38400, 57600, and 115200.
+
+
+    Edited on:  December 24, 2016
+      Editor:   Vittorio Esposito
+
+    Original version by:   Cristian Steib
+
+
+*/
+
+#include <Sim800L.h>
+#include <SoftwareSerial.h>
+
+#define RX  10
+#define TX  11
+
+Sim800L GSM(RX, TX);
+
+/*
+   In alternative:
+   Sim800L GSM;                       // Use default pinout
+   Sim800L GSM(RX, TX, RESET);
+   Sim800L GSM(RX, TX, RESET, LED);
+*/
+
+void setup() {
+  Serial.begin(9600);
+  GSM.begin(4800);
+
+  if (GSM.calculateLocation()) Serial.println("Location Calculated");
+  else Serial.println("Error in calculating location");
+
+  Serial.print("Location Code: ");
+  Serial.println(GSM.getLocationCode());
+
+  Serial.print("Longitude: ");
+  Serial.println(GSM.getLongitude());
+
+  Serial.print("Latitude: ");
+  Serial.println(GSM.getLatitude());
+
+  /*
+     Location Code:
+     0      Success
+     404    Not Found
+     408    Request Time-out
+     601    Network Error
+     602    No Memory
+     603    DNS Error
+     604    Stack Busy
+     65535  Other Error
+  */
+
+}
+
+void loop() {
+
+}