Add polo-smm

pvlib/spectrum/mismatch.py

@@ -710,3 +710,86 @@
         + coeff[2] * (airmass - 1.5)
     )
     return mismatch
+
+
+def spectral_factor_polo(precipitable_water, airmass_absolute, aod500, aoi,
+                         altitude, module_type=None, coefficients=None,
+                         albedo=0.2):
+    """
+    Estimation of spectral mismatch for BIPV application in vertical facades.
+    Parameters
+    ----------
+    precipitable_water : numeric
+        atmospheric precipitable water. [cm]
+
+    airmass_absolute : numeric
+        absolute (pressure-adjusted) airmass. [unitless]
+    aod500 : numeric
+        atmospheric aerosol optical depth at 500 nm. [unitless]
+    aoi : numeric
+        angle of incidence. [degrees]
+    altitude: numeric
+        altitude over sea level. [m]
+    module_type : str, optional
+        One of the following PV technology strings from [1]_:
+
+        * ``'cdte'`` - anonymous CdTe module.
+        * ``'monosi'`` - anonymous sc-si module.
+        * ``'cigs'`` - anonymous copper indium gallium selenide module.
+        * ``'asi'`` - anonymous amorphous silicon module.
+    albedo
+        Ground albedo (default value if 0.2). [unitless]
+
+    coefficients : array-like, optional
+        user-defined coefficients, if not using one of the default coefficient
+        set via the ``module_type`` parameter.
+
+    Returns
+    -------
+    modifier: numeric
+        spectral mismatch factor (unitless) which is multiplied
+        with broadband irradiance reaching a module's cells to estimate
+        effective irradiance, i.e., the irradiance that is converted to
+        electrical current.
+
+    References
+    ----------
+    [1]. Polo, J., Sanz-saiz, C., Development of spectral mismatch models
+    for BIPV applications in building façades Abbreviations : Renew. Energy 245
+    ,122820, 2025.:doi:`10.1016/j.renene.2025.122820`
+    """
+    if module_type is None and coefficients is None:
+        raise ValueError('Must provide either `module_type` or `coefficients`')
+    if module_type is not None and coefficients is not None:
+        raise ValueError('Only one of `module_type` and `coefficients` should '
+                         'be provided')
+    am_aoi = pvlib.atmosphere.get_relative_airmass(aoi)
+    pressure = pvlib.atmosphere.alt2pres(altitude)
+    am90 = pvlib.atmosphere.get_absolute_airmass(am_aoi, pressure)
+    Ram = am90/airmass_absolute
+    _coefficients = {}
+    _coefficients = {
+        'cdte': (-0.0009, 46.80, 49.20, -0.87, 0.00041, 0.053),
+        'monosi': (0.0027, 10.34, 9.48, 0.307, 0.00077, 0.006),
+        'cigs': (0.0017, 2.33, 1.30, 0.11, 0.00098, -0.0177),
+        'asi': (0.0024, 7.32, 7.09, -0.72, -0.0013, 0.089),
+    }
+    c = {
+        'asi': (0.0056, -0.020, 1.014),
+        'cigs': (-0.0009, -0.0003, 1),
+        'cdte': (0.0021, -0.01, 1.01),
+        'monosi': (0, -0.003, 1.0),
+    }
+    if module_type is not None:
+        coeff = _coefficients[module_type]
+        c_albedo = c[module_type]
+    else:
+        coeff = coefficients
+        c_albedo = (0.0, 0.0, 1.0)  # 0.2 albedo assumed
+        albedo = 0.2
+    smm = coeff[0] * Ram + coeff[1] / (coeff[2] + Ram**coeff[3]) \
+        + coeff[4] / aod500 + coeff[5]*np.sqrt(precipitable_water)
+    # Ground albedo correction
+    g = c_albedo[0] * (albedo/0.2)**2 \
+        + c_albedo[1] * (albedo/0.2) + c_albedo[2]
+    return g*smm